Rule-Mate 2000 GPH Bilge Pump Bundle with Rule 3800 GPH Marine Centrifugal Pump 12 Volt 2000 Gph + Centrifugal Pump

Rule-Mate RM2000A Automated Bilge Pump and Rule 17A Marine Rule 3800 Marine General Purpose Centrifugal Pump bundle keeps your boat dry and clean. The Rule-Mate bilge pump automatically turns on when water in the bilge reaches 2-3/4 inches, pumping out 2000 gallons per hour. It uses advanced "field effect" sensors that detect water but not oil, preventing accidental discharge during minor spills. Once water is drained, the sensors shut the pump off automatically. Complementing the automated bilge pump, the Rule 17A general purpose pump is designed for washdowns and livewell circulation at a flow rate of 3800 gallons per hour. With 1-1/2 inch inlets and outlets, this heavy-duty pump can be used for both commercial and recreational boats. However, it is a non-automatic pump requiring manual operation. Together, this bundle provides effective automated bilge pumping and manual washdown/circulation for comprehensive boat fluid management. The Rule-Mate bilge pump keeps your boat dry by automatically draining water from the bilge, while the Rule 17A pump enables thorough deck and surface washing whenever needed. Rule-Mate 2000 GPH 12 Volt Fully Automated Bilge Pump The Rule-Mate 2000 GPH pump consists of a powerful Rule bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8". Rule-Mate Intelligence Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to "check" for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2" and shutting off at 5/8". 2000 GPH (7570 LPH) at 0' (13.6V) All-in-one pump and switch Extra long life heavy duty motor 1" NPS discharge with 1" AND 1 1/8" screw-on ports Three year warranty WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov .

• 12 volt DC power compatible with most marine electrical systems
• Low pressure, high flow centrifugal pumps perfect for removing water without damage
• Bilge pump uses advanced "field effect" technology to avoid false alarms from oil spills
• 3800 GPH washdown and livewell pump with heavy-duty construction
• Automated 2000 GPH bilge pump turns on when water level reaches 2-3/4" and off when water is pumped out